Front Sight Hoods

fe1

Well-Known Member
Joined
Dec 30, 2007
Messages
290
Location
Texas
I’m needing some front sight hoods for Remington and Marlin rifles.
Preferably stainless open top but not exclusive.
PM me if you have any please
Thanks for looking
 

RidgeTop

Well-Known Member
Joined
Dec 14, 2021
Messages
690
Location
Ohio
I had an experience with my Winchester ;94 30-30. I was doing some load development and was able to improve the load to the point the poi was increased by several inches. Well, it's a useless load because when sighted with the bead in the center of the original hood the poi was way off. I went back to factory ammo specs and use the factory sights with the addition of a peep. I don't know if Winchester front sight covers are available in different heights.
1956 Winchester mod 94.
 

Attachments

  • winchester '94 004.jpg
    winchester '94 004.jpg
    1.1 MB · Views: 3

Bret GRAVELINE Graveline

Well-Known Member
Joined
Jan 31, 2019
Messages
415
Location
Camino california
I have a stash of them somewhere but only 1 stainless open top, it'll be over the weekend before I can get to them,
No they are not lost at least I hope not, sorry for the late reply, I took off to go fishing and took the hoods with me, I drive by 6 or 7 post offices along the way, however between forgetting and not locating them when I did it took several days for me to locate them, so if you have got them they should arrive tomorrow, I haven't unpacked yet but I do have a tracking number for them.
 

fe1

Well-Known Member
Joined
Dec 30, 2007
Messages
290
Location
Texas
Thanks for the reply. It’s showing in the system but hasn’t arrived yet. I’ll let you know when it does.
Thanks again
Floyd
No they are not lost at least I hope not, sorry for the late reply, I took off to go fishing and took the hoods with me, I drive by 6 or 7 post offices along the way, however between forgetting and not locating them when I did it took several days for me to locate them, so if you have got them they should arrive tomorrow, I haven't unpacked yet but I do have a tracking number for them.
 

Recent Posts

Top