Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
The Basics, Starting Out
First semi-build for me
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="257WTBY" data-source="post: 714977" data-attributes="member: 56428"><p>WELL I GOT MY SENDERO AND I AM NOT HAPPY....</p><p> </p><p>I mounted one of my leupolds as my huskemaw was not in yet. I took it to the range to do break in with a box of FACTORY remington ammo. I made sure the gun was clean to start with and loaded the first round I was only shooting at 50 yds since the scope was only bore sighted and i needed break in rounds. I closed the bolt and got behind it and fired. I went to open the chamber the bolt raised and WILL NOT PULL TO THE REAR AT ALL i mean it wont budge. So after dicking with it for 15 min at the range i came home and used a cleaning rod to try to drive out the empty brass. I got the bolt to the rear but the empty brass was stuck in the chamber. Well after i drove the primer out i pour PB blaster down the barrel I used a wood dowel and swedged the barrel in my vice with aluminum jaws in the vice. I BROKE the back of the empty case off but over 3/4 of the empty brass is stuck in the chamber. I called a few gun smith buddies and they said they have seen them stuck but never to this degree. I called customer service and the tech i talked to said i had obviously put over pressure laoded shells into the gun. THERE IS ONE SHELL MISSING OUT OF THE BOX OF 100% FACTORY REMINGTON AMMUNITION. Is this what i am going to deal with when dealing with Remington? My buddies the gun smiths said to send it back so i guess that is what i will do. Have any of u ever seen this happen? Needless to say I am NOT HAPPY at all. Thanks for any advice u can give me.</p></blockquote><p></p>
[QUOTE="257WTBY, post: 714977, member: 56428"] WELL I GOT MY SENDERO AND I AM NOT HAPPY.... I mounted one of my leupolds as my huskemaw was not in yet. I took it to the range to do break in with a box of FACTORY remington ammo. I made sure the gun was clean to start with and loaded the first round I was only shooting at 50 yds since the scope was only bore sighted and i needed break in rounds. I closed the bolt and got behind it and fired. I went to open the chamber the bolt raised and WILL NOT PULL TO THE REAR AT ALL i mean it wont budge. So after dicking with it for 15 min at the range i came home and used a cleaning rod to try to drive out the empty brass. I got the bolt to the rear but the empty brass was stuck in the chamber. Well after i drove the primer out i pour PB blaster down the barrel I used a wood dowel and swedged the barrel in my vice with aluminum jaws in the vice. I BROKE the back of the empty case off but over 3/4 of the empty brass is stuck in the chamber. I called a few gun smith buddies and they said they have seen them stuck but never to this degree. I called customer service and the tech i talked to said i had obviously put over pressure laoded shells into the gun. THERE IS ONE SHELL MISSING OUT OF THE BOX OF 100% FACTORY REMINGTON AMMUNITION. Is this what i am going to deal with when dealing with Remington? My buddies the gun smiths said to send it back so i guess that is what i will do. Have any of u ever seen this happen? Needless to say I am NOT HAPPY at all. Thanks for any advice u can give me. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
The Basics, Starting Out
First semi-build for me
Top