Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
First Bedding Job Completed.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hard rock" data-source="post: 2395805" data-attributes="member: 116620"><p>Looks like you did a fine job make sure your recoil lug isn't bottomed out . The lug needs a little clearance on the bottom and front . As far as floating the barrel you can float it all the way or leave the chamber area glassed if it shoots with it that way , if not float it all the way too the receiver . Make sure when done your not flexing the action . If you have a good solid fit tighten every thing down equal you should be good too go let us know how it shoots good luck</p></blockquote><p></p>
[QUOTE="Hard rock, post: 2395805, member: 116620"] Looks like you did a fine job make sure your recoil lug isn’t bottomed out . The lug needs a little clearance on the bottom and front . As far as floating the barrel you can float it all the way or leave the chamber area glassed if it shoots with it that way , if not float it all the way too the receiver . Make sure when done your not flexing the action . If you have a good solid fit tighten every thing down equal you should be good too go let us know how it shoots good luck [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
First Bedding Job Completed.
Top