backyardsniper
Well-Known Member
Accurate Ordnance 300 win barreled action, 24' rock creek sendero contour, Little jimmy brake , ceracoted FDE, Timney, round count approx 200, less than 250. Built on a worked rem 700 LA. $2200
Pheonix custom rifles barreled action, 338 lapua with 26' proof research barrel sendero contour, little jimmy brake, timney, round count about 80. Gray ceracote. Is currently at PCR getting raceways reamed for better fit of the PTG bolt., also on a rem 700 LA worked. $2200 rifle should be back in a couple weeks. $2200
Remington 700 police 300 win barreled action less than 100rds, has TPS 20 moa rail and a nicely worked old school factory trigger. Had a j-lock but i changed out the firing pin assembly and bolt shroud so it has no trace of j-lock parts. I have shot several 2"-2 1/4" 400yd groups with it It is a very good shooting factory barreled action. $600
Also available will be 1 black long action AIAX chassis pre 2014 style 1 FDE AIAX chassis pre 2014 style $1000 each both rem 700 LA
1 Manners T5 mini chassis dipped in multi cam rem 700 long action M40 barrel channel 2 flush cups on left $700
10x 338 lapua AICS non cip mags 9 black basically new and one gray ceracote 4x300 win mag AICS and 1x 10rd short action $70 each the more you buy the cheaper they will get.
1 set of 34mm rings ceracoated FDE, I believe mark 4 but not sure. Has serial number on the back of ring base, i can send you a pic if you want, nice rings though. They are highs to accomodate the AX chassis. $100
1 nightforce 30mm unimount medium height. $150
1 set of Ken Ferrel 30mm Medium rings. $100
860x 208 amax $250 and 900x 178 amax $260 or $485 for all of them....SOLD
1 nightforce F1 3.5-15x50 NPRF1 $1700
Will also cross post the accessories in the proper section, all prices are OBO this stuff is going so I can buy an AXMC And if you happen to want everything listed here which totals $11,435, I'll take $10,000 for it all shipped. Pm with number or email for pics or any details.
Pheonix custom rifles barreled action, 338 lapua with 26' proof research barrel sendero contour, little jimmy brake, timney, round count about 80. Gray ceracote. Is currently at PCR getting raceways reamed for better fit of the PTG bolt., also on a rem 700 LA worked. $2200 rifle should be back in a couple weeks. $2200
Remington 700 police 300 win barreled action less than 100rds, has TPS 20 moa rail and a nicely worked old school factory trigger. Had a j-lock but i changed out the firing pin assembly and bolt shroud so it has no trace of j-lock parts. I have shot several 2"-2 1/4" 400yd groups with it It is a very good shooting factory barreled action. $600
Also available will be 1 black long action AIAX chassis pre 2014 style 1 FDE AIAX chassis pre 2014 style $1000 each both rem 700 LA
1 Manners T5 mini chassis dipped in multi cam rem 700 long action M40 barrel channel 2 flush cups on left $700
10x 338 lapua AICS non cip mags 9 black basically new and one gray ceracote 4x300 win mag AICS and 1x 10rd short action $70 each the more you buy the cheaper they will get.
1 set of 34mm rings ceracoated FDE, I believe mark 4 but not sure. Has serial number on the back of ring base, i can send you a pic if you want, nice rings though. They are highs to accomodate the AX chassis. $100
1 nightforce 30mm unimount medium height. $150
1 set of Ken Ferrel 30mm Medium rings. $100
860x 208 amax $250 and 900x 178 amax $260 or $485 for all of them....SOLD
1 nightforce F1 3.5-15x50 NPRF1 $1700
Will also cross post the accessories in the proper section, all prices are OBO this stuff is going so I can buy an AXMC And if you happen to want everything listed here which totals $11,435, I'll take $10,000 for it all shipped. Pm with number or email for pics or any details.
Last edited:
