Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Extraction problems 6/284
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Iron Worker" data-source="post: 1053832" data-attributes="member: 2332"><p>Ok I have the rifle back ,will shoot it tomorrow. Gunsmith ran the new reamer in it and said "This reamer is a SAMMIE spec Hunting reamer no more turning necks" I asked him how was I able to chamber a round in the gun if chamber was too short he said " I was adjusting my dies wrong ?" (I was adjusting to the shell holder and than down another 1/8 turn) He said now with new brass Adjust to the shell holder but back off 1/8 of a turn. Sounds like he's telling me to neck size my brass ? Also I have 50 Lupua brass that I sized already and he said shooting those I might have a ring around the head ,and could ruin the brass. So he said "Seat the bullets out to contact rifling lands and load a moderate charge to fire form them to new chamber. So that's what I'll do. He also said "Nothing wrong with my throat " Thanks for your interest . Web page for this gunsmith <a href="http://www.jrhadvancedgunsmithing.com" target="_blank">www.jrhadvancedgunsmithing.com</a></p></blockquote><p></p>
[QUOTE="Iron Worker, post: 1053832, member: 2332"] Ok I have the rifle back ,will shoot it tomorrow. Gunsmith ran the new reamer in it and said "This reamer is a SAMMIE spec Hunting reamer no more turning necks" I asked him how was I able to chamber a round in the gun if chamber was too short he said " I was adjusting my dies wrong ?" (I was adjusting to the shell holder and than down another 1/8 turn) He said now with new brass Adjust to the shell holder but back off 1/8 of a turn. Sounds like he's telling me to neck size my brass ? Also I have 50 Lupua brass that I sized already and he said shooting those I might have a ring around the head ,and could ruin the brass. So he said "Seat the bullets out to contact rifling lands and load a moderate charge to fire form them to new chamber. So that's what I'll do. He also said "Nothing wrong with my throat " Thanks for your interest . Web page for this gunsmith [url]www.jrhadvancedgunsmithing.com[/url] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Extraction problems 6/284
Top