Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
E. A. Brown Accuracy Barrel
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="SMK1000plus" data-source="post: 1609943" data-attributes="member: 93846"><p>Not necessarily smaller than normal but, worn/dull and with chips in the flutes. The rings on the spent case are typically caused by gouging from an uneven or chipped flute(s). That along will cause brass to get stuck in the chamber after firing. Trying to polish out rings that bad may well cause on over-diameter chamber. It may affect accuracy or require fire-forming cases for good accuracy.</p><p></p><p>CaptnC: I would really push EA Brown to replace the barrel. Don't be bashful about letting him know you have an active thread on the matter, posted on a major forum!</p><p></p><p>IF that fails, then I would probably just rechamber the barrel to an Ackley Improved. That should eliminate the chamber issue and give you a little extra case capacity while still allowing for factory ammunition use. Just a suggestion...</p></blockquote><p></p>
[QUOTE="SMK1000plus, post: 1609943, member: 93846"] Not necessarily smaller than normal but, worn/dull and with chips in the flutes. The rings on the spent case are typically caused by gouging from an uneven or chipped flute(s). That along will cause brass to get stuck in the chamber after firing. Trying to polish out rings that bad may well cause on over-diameter chamber. It may affect accuracy or require fire-forming cases for good accuracy. CaptnC: I would really push EA Brown to replace the barrel. Don't be bashful about letting him know you have an active thread on the matter, posted on a major forum! IF that fails, then I would probably just rechamber the barrel to an Ackley Improved. That should eliminate the chamber issue and give you a little extra case capacity while still allowing for factory ammunition use. Just a suggestion... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
E. A. Brown Accuracy Barrel
Top