Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Dirty bore
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="VinceMule" data-source="post: 2765858" data-attributes="member: 122164"><p>That carbon in the barrel is not going to come out easy, and it will take some serious effort.</p><p></p><p>New bronze bristle brushes are your first line of attack. 60 cycles on a brush, then save it for use later on. Inspect the barrel. Put on a new brush and go at it again with 60 cycles on the brush. Inspect.</p><p></p><p>Now, if you still have carbon, JB on tight patches using a punch type of jag. Short stroke the patches in the problem areas. I use 5 JB soaked patches. I have had to resort to using the JB on a Iosso or Montana Extreme plastic brush. When the plastic brush gets some wear in it, you can completely load the brush with JB, then scrub back and forth in the carbon build up areas.</p><p></p><p>If the JB does not work on the plastic brush, Wind some FINE BRONZE wool in the brush, and load the brush with JB, 20 cycles with the brush, wash out barrel and inspect.</p><p></p><p>If the bronze wool in the brush does not work, then screw on one of the used Bronze bristle brushes and load it with JB and give it 20 Cycles, then inspect.</p></blockquote><p></p>
[QUOTE="VinceMule, post: 2765858, member: 122164"] That carbon in the barrel is not going to come out easy, and it will take some serious effort. New bronze bristle brushes are your first line of attack. 60 cycles on a brush, then save it for use later on. Inspect the barrel. Put on a new brush and go at it again with 60 cycles on the brush. Inspect. Now, if you still have carbon, JB on tight patches using a punch type of jag. Short stroke the patches in the problem areas. I use 5 JB soaked patches. I have had to resort to using the JB on a Iosso or Montana Extreme plastic brush. When the plastic brush gets some wear in it, you can completely load the brush with JB, then scrub back and forth in the carbon build up areas. If the JB does not work on the plastic brush, Wind some FINE BRONZE wool in the brush, and load the brush with JB, 20 cycles with the brush, wash out barrel and inspect. If the bronze wool in the brush does not work, then screw on one of the used Bronze bristle brushes and load it with JB and give it 20 Cycles, then inspect. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Dirty bore
Top