• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED Custom .260 Rem

Status
Not open for further replies.

Special Delivery

Well-Known Member
Joined
Oct 6, 2011
Messages
75
Location
Raleigh N.C.
-Trued and Blueprinted Remington 700 SA
-26' Krieger MTU Barrel Chambered .260 Rem for Lapua Brass
-Mcmillan A-5 OD Green w/ (4) Flush Cups and (1) sling stud
-Badger M4 Bottom Metal
-Timney Trigger @ 2.5lbs
-Devcon Bedded
-Custom Bolt Knob w/ Lapua Case Embedded (Dead Primer)
-All Metal Cerakoted Armor Black
-Rifle has only 10 rounds through it
-Redding Comp Neck Dies (.291 Bushing) Included w/ Rifle
*2500
Rifle1.jpg

Rifle2.jpg

Rifle3.jpg

Rifle4.jpg

Rifle5.jpg

Rifle6.jpg
 
Who did the machine work?
What's the barrel twist rate?
Group for the 10 shots you fired?
Interested in any trades?
 
Ryan Field in Charlotte, NC did the Smithing. Barrel twist is 1-8.5 so you can run almost all 6.5 bullets. Shot a group in the .2's @ 100 with Cor Bon Lapua 139 ammo in Lapua Brass, but that was with a 20x Leupold MK4 and not my normal 32x NF. Reamer is a .297nk with .088 Freebore which is what GA Precision and Terry Cross both use for their builds. No trades unless you have a Nightforce 5.5-22x50 and cash. Thanks
 
Yes I did, prior to me biting the bullet yesterday afternoon and ordering an m2008 action and 1 in 8 twist broughton 6mm barrel that's going to GA Precision to be built. He didn't want to trade.
 
Status
Not open for further replies.

Recent Posts

Top