Copper bullet load data for 6.5prc

[IHFarmer07]

Would anyone have any sort of idea or information on where to start at with reloads using 120-127 grain copper bullets for the 6.5prc using reloader 23 and reloader 26?

 

[IHFarmer07]

Bump

 

[Dmagna]

I started at 54 grains and did a 10 shot ladder to find pressure. Seated the bullet .040 off and I settle on a load at 3140 FPS. That was for a 127 LRX

 

[IHFarmer07]

I started at 54 grains and did a 10 shot ladder to find pressure. Seated the bullet .040 off and I settle on a load at 3140 FPS. That was for a 127 LRX

Awesome, thank you! What powder did you use with that charge weight?

 

[Dmagna]

Rl 26. But you can start lower, I loaded 10 shots at .4 gr till pressure and then loaded an Ocw for the 2 grains before pressure. At .2 gr increases

 

[IHFarmer07]

Rl 26. But you can start lower, I loaded 10 shots at .4 gr till pressure and then loaded an Ocw for the 2 grains before pressure. At .2 gr increases

Great, thank you much.....I've looked and looked and it's really hard to find data on some of these bullet/powder combos for 6.5prc and alike, lol just gotta figure something out for reloader 23.