thorbird
Well-Known Member
Complete PSA AR15 - New - Minus Stripped Lower $1,080 Shipped
If you have a stripped lower, this set up will complete your AR15. Includes BCG, Charging Handle, PSA Premium Classic Lower Build Kit including entire stock assembly. $1,080 shipped to the lower 48 states.
Best to contact me at my direct email: [email protected]
The Upper is the following:
PSA 16'' HF Lighter Profile Madness - Mid-Length CMV CL Stripped Upper
16" Barrel length
"Machine Gun Steel" barrel
Lighter profile
5.56 Nato Chamber
1 in 7" twist rate
Extra-thick chrome-lined bore
M4 Feed ramps
F-Marked Front sight post
A2 Flash Hider
Sling Loop
Mid-length Hand Guards w/ heat shields
Forged upper receiver
T-Marks
Details
Barrel:
A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a Mid-length gas system. The A2 lighter profile barrel allows for better balance and portability over the standard A2 profile and is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. Barrel is finished off with an F-marked front sight post with sling swivel, standard handguards and an A2 flash hider. This is not a "pencil" barrel.
Upper:
Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring T-marks, but no logo, these upper upper receivers are made for us right here in the USA.
Each upper is assembled to order with US-made parts, and test fired to check gas function.
Parts Kit:
The parts kit is the Palmetto State Armory Premium Classic Lower Build Kit:
Includes PSA M4 Stock,A2 Pistol grip, Palmetto State Armory Classic Lower Parts Kit and Mil-Spec diameter 6-position 7075 aluminum buffer tube assembly. Everything you need to finish your stripped lower.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
If you have a stripped lower, this set up will complete your AR15. Includes BCG, Charging Handle, PSA Premium Classic Lower Build Kit including entire stock assembly. $1,080 shipped to the lower 48 states.
Best to contact me at my direct email: [email protected]
The Upper is the following:
PSA 16'' HF Lighter Profile Madness - Mid-Length CMV CL Stripped Upper
16" Barrel length
"Machine Gun Steel" barrel
Lighter profile
5.56 Nato Chamber
1 in 7" twist rate
Extra-thick chrome-lined bore
M4 Feed ramps
F-Marked Front sight post
A2 Flash Hider
Sling Loop
Mid-length Hand Guards w/ heat shields
Forged upper receiver
T-Marks
Details
Barrel:
A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a Mid-length gas system. The A2 lighter profile barrel allows for better balance and portability over the standard A2 profile and is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. Barrel is finished off with an F-marked front sight post with sling swivel, standard handguards and an A2 flash hider. This is not a "pencil" barrel.
Upper:
Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring T-marks, but no logo, these upper upper receivers are made for us right here in the USA.
Each upper is assembled to order with US-made parts, and test fired to check gas function.
Parts Kit:
The parts kit is the Palmetto State Armory Premium Classic Lower Build Kit:
Includes PSA M4 Stock,A2 Pistol grip, Palmetto State Armory Classic Lower Parts Kit and Mil-Spec diameter 6-position 7075 aluminum buffer tube assembly. Everything you need to finish your stripped lower.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
