Complete neck turning set-up. Benchrite neck turning lathe with .308 and magnum bolt face case holders PMA Model-A neck turning tool - 20 degree cutter - 7mm mandrel PMA Model-A neck turning tool - 30 degree cutter - 7mm mandrel .270 neck turning mandrel 6.5mm oversized expander mandrel 7mm oversized expander mandrel All components are hardly used. I had only turned approx. 300 pieces of brass. I purchased the lathe as a blemish. the anodizing on the motor plate was slightly swirled. It is just cosmetic and the unit functions perfectly. $485.00 Shipped 920-210-7860 firstname.lastname@example.org Email direct for fastest response.