Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case lube removal
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Chadp82" data-source="post: 2861052" data-attributes="member: 114151"><p>I would suggest starting at the minimum powder load, and SAAMI length.</p><p></p><p>A few things. Powder charge had been mentioned a few times so will leave that alone.</p><p></p><p>The second is seating depth. If you are trying to be at the lands or just off, you do create more space in the case. Excess space can cause pressure problem too. Also, it's not an absolute to fill the case but with some powders you have extra space too.</p><p></p><p>Another thing is temperature. Being summer, if it's a recent issue and depending on type of powder, the powder used could be having some temperature sensitivity issues.</p><p></p><p>I would also check the neck size after sizing. If it's too tight, could be another place to check.</p><p></p><p>I wails start at the bottom of the load chart, check SAAMI measurements on everything and work up from there.</p><p></p><p>You also mention its reloads. If you go grab a box of shelf ammo and it doesn't do it, it would rule out the rifle. The rifle is the least likely culprit IMO.</p></blockquote><p></p>
[QUOTE="Chadp82, post: 2861052, member: 114151"] I would suggest starting at the minimum powder load, and SAAMI length. A few things. Powder charge had been mentioned a few times so will leave that alone. The second is seating depth. If you are trying to be at the lands or just off, you do create more space in the case. Excess space can cause pressure problem too. Also, it’s not an absolute to fill the case but with some powders you have extra space too. Another thing is temperature. Being summer, if it’s a recent issue and depending on type of powder, the powder used could be having some temperature sensitivity issues. I would also check the neck size after sizing. If it’s too tight, could be another place to check. I wails start at the bottom of the load chart, check SAAMI measurements on everything and work up from there. You also mention its reloads. If you go grab a box of shelf ammo and it doesn’t do it, it would rule out the rifle. The rifle is the least likely culprit IMO. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case lube removal
Top