Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Cannot get barrel clean!!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="RemingtonMagnum" data-source="post: 1043829" data-attributes="member: 15816"><p>I have a Magnum Research carbon fiber lined barrel chambered in 7mm Rem Mag. Just been trying to break in the barrel and I cannot get the copper fouling out! I've used BoreTech Copper remover, Hoppes Copper solvent and even tried some JB Bore paste. I don't have a barrel camera so cant see what the middle of the barrel looks like but at the very end of the muzzle I can still see copper color in the rifling. When I clean with solvents, I run a wet patch through followed by 10-15 passes with a ProShot Bronze brush. Then run 2 dry patches. And repeat until the brush has made a total of about 300 passes! Still cant get that copper color to go away! I've tried the JB Bore paste 2 or 3 times and followed the instructions on the container every time. Don't know what to do any help or advise is greatly appreciated! Thanks!!</p><p> </p><p>And the ammo I am using to break in is just some reloads I threw together for it they are 160gr nosler.</p></blockquote><p></p>
[QUOTE="RemingtonMagnum, post: 1043829, member: 15816"] I have a Magnum Research carbon fiber lined barrel chambered in 7mm Rem Mag. Just been trying to break in the barrel and I cannot get the copper fouling out! I've used BoreTech Copper remover, Hoppes Copper solvent and even tried some JB Bore paste. I don't have a barrel camera so cant see what the middle of the barrel looks like but at the very end of the muzzle I can still see copper color in the rifling. When I clean with solvents, I run a wet patch through followed by 10-15 passes with a ProShot Bronze brush. Then run 2 dry patches. And repeat until the brush has made a total of about 300 passes! Still cant get that copper color to go away! I've tried the JB Bore paste 2 or 3 times and followed the instructions on the container every time. Don't know what to do any help or advise is greatly appreciated! Thanks!! And the ammo I am using to break in is just some reloads I threw together for it they are 160gr nosler. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Cannot get barrel clean!!!
Top