Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
big cartridges chamber lenght
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 1114166" data-attributes="member: 2736"><p>If you are talking about the neck length clearance over the neck chamber length. There should be at least .020 thousandths of end clearance between the case neck and the neck chamber length.</p><p></p><p>I recommend trimming the case necks .020 to .030 shorter than the neck chamber length on most standard shouldered cases and no less than .020 for the AI shouldered cases (40o)</p><p></p><p>First establish what your reamer Case length is and then trim the case until it is .030 shorter.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 1114166, member: 2736"] If you are talking about the neck length clearance over the neck chamber length. There should be at least .020 thousandths of end clearance between the case neck and the neck chamber length. I recommend trimming the case necks .020 to .030 shorter than the neck chamber length on most standard shouldered cases and no less than .020 for the AI shouldered cases (40o) First establish what your reamer Case length is and then trim the case until it is .030 shorter. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
big cartridges chamber lenght
Top