• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Benchmark 6gt prefit for zeus/vector QC

Jakeweb09

Well-Known Member
Joined
Feb 8, 2020
Messages
1,631
Location
washington
I've got a new 6gt prefit for a terminus Zeus, I believe this is benchmarks m24, but not confirmed. Chambered by straitjacket. 7 twist. 1.250 shank .920 muzzle. Supposed to be 26" but looks more like 25.75" if that matters to you. I've got its twin mounted currently with 50 rounds down it. Shooting sub 1/4" with 36.5g h4350 and a 108 Berger at 2850. Barrel does have a couple marks from what looks to be a vice toward the muzzle end pictured. But brand new never fired. Thread protector included. $550 shipped

IMG_2060.jpeg
IMG_2061.jpeg
IMG_2062.jpeg
IMG_2063.jpeg
IMG_2064.jpeg
 
Last edited:
I'd like to see a picture of the thread tenon threads without the cover.

Thanks!
 
top. Just shot the twin barrel yesterday..printed a 1.5" group at 500 yards with 108bts and 37.2g of 4350 at 2920 fps
 
Possible trades would be some faster twist barrels..steel or carbon depending…230 hybrids, 215 hybrids, maybe a lighter weight stock/chassis for my rimx?
 
It's twin barrel shot this 5 shot group this morning in a 6mph wind. The case is 1.7" long. Without the one pulled right it's sitting at about an inch center to center
IMG_2180.jpeg
 
Top