Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bedding Rem Sendero HS Precision stock
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 191760" data-attributes="member: 2736"><p>Aussie</p><p></p><p>Remove the action screws while holding the action in the stock</p><p>(you can use some surgical tubing rapped around the action and</p><p>the stock to hold every thing in place) and look through the pillars</p><p>to see if the threaded holes in the recever are centered in the pillars</p><p>(VERY IMPORTANT) if not then you must clear the bedding screw</p><p>so that it only touches the floor metal with the tapered part of </p><p>the screw head or re'bed the action with the action screws floating</p><p>in the center of the pillars.</p><p></p><p>I use shrink wrap on the action screws to center while bedding.</p><p></p><p>You dont want the action screws to become the recoil lug after</p><p>firing a few rounds.</p><p></p><p>Once this has been done torque both action screws to 25inch/lbs</p><p>and fire.</p><p></p><p>Then increse the torque in 5 inch/lb increments and fire again .</p><p></p><p>If group size does not improve then leave it there, If it does improve</p><p>then repeat process until it stops improving.But do not exceed 65 in/lbs</p><p></p><p>Maybe this will help</p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 191760, member: 2736"] Aussie Remove the action screws while holding the action in the stock (you can use some surgical tubing rapped around the action and the stock to hold every thing in place) and look through the pillars to see if the threaded holes in the recever are centered in the pillars (VERY IMPORTANT) if not then you must clear the bedding screw so that it only touches the floor metal with the tapered part of the screw head or re'bed the action with the action screws floating in the center of the pillars. I use shrink wrap on the action screws to center while bedding. You dont want the action screws to become the recoil lug after firing a few rounds. Once this has been done torque both action screws to 25inch/lbs and fire. Then increse the torque in 5 inch/lb increments and fire again . If group size does not improve then leave it there, If it does improve then repeat process until it stops improving.But do not exceed 65 in/lbs Maybe this will help J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bedding Rem Sendero HS Precision stock
Top