Barrels barrels barrels

[Elk Hunter 338]

Left too right ALL SHIPPED PRICES ALL FINISH LENGTHS AT LONGEST
BARTELIN M24 284 CAL 26" 8.7 TW $350
BROUGHTON 5.5 26" 308 CAL 9 TW $350
BART 224 26" CAL 12 TW #2b $300
MULLER WORKS 264 26" CAL 8 TW #3 $300
MCGOWEN 224 CAL 24" 8 TW #2 $250
BART REM MAG CONTOUR 264 CAL 24" 8 TWIST $350
MCGOWEN 308 CAL 26" 10 TW CHROME #5 $300

 

[Coyote Shadow Tracker]

Left too rightView attachment 340024

Elk I like the far left one-What are they?

Edit 10:20PM I didn't see the caliber or prices when you first posted. I would have taken the Bart 264 Mag, but already taken. The 284 on the left end is sweet I don't need a 284 right now but what is the cut ?

 

[ZReed85]

I'll take the spiral fluted mullerworks #3 8 twist 6.5 blank in the middle there if it's cut rifled.

Thanks Dallas!

 

[JAYgs8163]

PM inbound on the:

"BART REM MAG CONTOUR 264 CAL 8 TWIST $350"

 

[onpoint]

I will take the second from the BART REM MAG CONTOUR 264 CAL 8 TWIST $350

 

[joshf303]

Length on the McGowen .224 barrel?

 

[VLD Pilot]

Left too right ALL SHIPPED PRICES
BARTELIN M24 284 CAL 26" 8.7 TW $350
BROUGHTON 5.5 26" 308 CAL 9 TW $350
BART 224 26" CAL 12 TW #2b $300
MULLER WORKS 264 CAL 8 TW #3 $300
MCGOWEN 224 CAL 8 TW #2 $250
BART REM MAG CONTOUR 264 CAL 8 TWIST $350
MCGOWEN 308 CAL 10 TW CHROME #5 $300
View attachment 340024

You have the left two barrels listed at 26". Is that correct ? The Broughton looks much longer

 

[JAYgs8163]

I also take the Mullerworks if Zreed85 does not want it along with the "BART REM MAG CONTOUR 264 CAL 8 TWIST $350" I pm'd you on. Thanks, Joe

 

[Tac284]

Can you confirm the length of the Broughton and the muzzle diameter as it sits. Thanks

 

[Zhomeguy]

I'm such a barrel slut! Was worth the look!

 

[Elk Hunter 338]

You have the left two barrels listed at 26". Is that correct ? The Broughton looks much longer

Its funny, you would think after how many years of doing this I'd be familiar with how run a tape measure
all jokes aside yes its 26" finish!!

all the broughton barrels I've had have a longer cylinder length and usually 2 too 4 inches on the muzzle for a respective length for 26 or so finish. its a 30.5" piece of steel 1.200" cylinder dia

 

[Elk Hunter 338]

Can you confirm the length of the Broughton and the muzzle diameter as it sits. Thanks

the broughton over all is 30.5" and has a muzzle dia if making it a 26" blank is .750"

 

[VLD Pilot]

the broughton over all is 30.5" and has a muzzle dia if making it a 26" blank is .750"

So around .700 at the 30" length I'm guessing