Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
barrel to stock fit
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="James Jones" data-source="post: 169175" data-attributes="member: 8843"><p>You can fill the flutes with modeling clay then tape over them but simply using a few layers of tape will work as the tape won't seat up into the flute unless you force it in their so you will just end up with a flat spot where the flutes are.</p><p> </p><p>When I bed a barrel channel yet want the barrel floated I use 4 layers of duct tape , it works realy well if you run the tape long ways from the action to the muzzle , just center the tape on the bottom of the barrel and you will end up with a nice even smooth barrel chanel. just use a good coat of of release , paste wax works well.</p></blockquote><p></p>
[QUOTE="James Jones, post: 169175, member: 8843"] You can fill the flutes with modeling clay then tape over them but simply using a few layers of tape will work as the tape won't seat up into the flute unless you force it in their so you will just end up with a flat spot where the flutes are. When I bed a barrel channel yet want the barrel floated I use 4 layers of duct tape , it works realy well if you run the tape long ways from the action to the muzzle , just center the tape on the bottom of the barrel and you will end up with a nice even smooth barrel chanel. just use a good coat of of release , paste wax works well. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
barrel to stock fit
Top