Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Barrel cooling methods? Chamber Chiller Pro vs The Original Barrel Cooler
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mike Matteson" data-source="post: 2587573" data-attributes="member: 101791"><p>I came across this set up. It would take some work, but. CO2 cooling system: Fitting a ball value is all is needed. A 20lb tank is minimum. The hose should be tapered at the chamber end for ease of sliding it into position. The CO2 is released with low flow. It only takes 20-30 sec. to reach ambient temp unless the barrel is quite hot. When I feel the barrel is approaching close to the same temp at the scope, the CO2 is turned off. It will continue to cool from inside out. Many at the range have adopted this system. Need a bore guide for the uses. Run your tubing from the CO2 tank into an un-ported Delrin bore guide for ease of application. This I copied down for the info. I haven't built one yet. I haven' had time to look into it very hard.</p></blockquote><p></p>
[QUOTE="Mike Matteson, post: 2587573, member: 101791"] I came across this set up. It would take some work, but. CO2 cooling system: Fitting a ball value is all is needed. A 20lb tank is minimum. The hose should be tapered at the chamber end for ease of sliding it into position. The CO2 is released with low flow. It only takes 20-30 sec. to reach ambient temp unless the barrel is quite hot. When I feel the barrel is approaching close to the same temp at the scope, the CO2 is turned off. It will continue to cool from inside out. Many at the range have adopted this system. Need a bore guide for the uses. Run your tubing from the CO2 tank into an un-ported Delrin bore guide for ease of application. This I copied down for the info. I haven't built one yet. I haven' had time to look into it very hard. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Barrel cooling methods? Chamber Chiller Pro vs The Original Barrel Cooler
Top