Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Anyone else using rl-17?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="7stw" data-source="post: 680410" data-attributes="member: 22854"><p>I just recently picked up a 25-06 MKII VT. Before buying the 25-06,I had read about the velocity increase, and the lower pressures etc. Well, long story short, I bought some, tried it, and so far I like the accuracy, and the clean burning. Case necks are clean, and little to no fouling in barrel. I started 1.2 grains, lower than published max , which was 53, with a 100 grain bullet. I did not chrono any of the loads, as I was actually fire forming my brass, but that being said, accuracy was very good. </p><p>I am told that it is supposed to be very good in 308, 22-250, and 300 win mag as well. And according to the write ups, it supposed to be un effected by temps. Burn rate somewhere in the 4350-4831 area, with less pressure, and more velocity. It's got my attention, but time and the chrono will tell the real story.</p></blockquote><p></p>
[QUOTE="7stw, post: 680410, member: 22854"] I just recently picked up a 25-06 MKII VT. Before buying the 25-06,I had read about the velocity increase, and the lower pressures etc. Well, long story short, I bought some, tried it, and so far I like the accuracy, and the clean burning. Case necks are clean, and little to no fouling in barrel. I started 1.2 grains, lower than published max , which was 53, with a 100 grain bullet. I did not chrono any of the loads, as I was actually fire forming my brass, but that being said, accuracy was very good. I am told that it is supposed to be very good in 308, 22-250, and 300 win mag as well. And according to the write ups, it supposed to be un effected by temps. Burn rate somewhere in the 4350-4831 area, with less pressure, and more velocity. It's got my attention, but time and the chrono will tell the real story. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Anyone else using rl-17?
Top