Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Anybody heard of EGW scope rails? Any good?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Camshaft" data-source="post: 518086" data-attributes="member: 25423"><p>They are skim bedded the same way you would skim bed a rifle in a stock. I use JB weld. Apply a very thin fine release agent to your action. I use kiwi neutral shoe Polish. Then hit the bottom mounting surface of the base with some 800 grit to give it a little grip. Also coat your mounting screws with release agent. Put a small amount of bedding compound on the mounting surface of your scope rail and mount your rail. Do not tighten the screws enoungh to squeeze all the bedding compound out. Just enough to snug it up and get a good bedding surface. Just like bedding an action. Clean up excess with qtips and allow to setup over night. This is just a quick run down if you do a search on Google I'm sure you can find better instructions and photos. Hope this helps.</p></blockquote><p></p>
[QUOTE="Camshaft, post: 518086, member: 25423"] They are skim bedded the same way you would skim bed a rifle in a stock. I use JB weld. Apply a very thin fine release agent to your action. I use kiwi neutral shoe Polish. Then hit the bottom mounting surface of the base with some 800 grit to give it a little grip. Also coat your mounting screws with release agent. Put a small amount of bedding compound on the mounting surface of your scope rail and mount your rail. Do not tighten the screws enoungh to squeeze all the bedding compound out. Just enough to snug it up and get a good bedding surface. Just like bedding an action. Clean up excess with qtips and allow to setup over night. This is just a quick run down if you do a search on Google I'm sure you can find better instructions and photos. Hope this helps. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Anybody heard of EGW scope rails? Any good?
Top