Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm-08 Ladder test to 300 yrds - what do I have?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="frankinaustin" data-source="post: 1116341" data-attributes="member: 71931"><p>Hello everyone - thanks to all for your valued insights!</p><p>I conducted a second ladder and used the exact same brass, loads, etc. Below is a pic of my first target and my second (1 week later) target.</p><p></p><p>I'm going to now work on seeing if I get good groups with loads 2, 8, and 10, which are 39.1, 40.9, and 41.5 gr of Varget under 140 gr Nos BT Combined Technology with Neck Sized Lapua 708 brass, BR2 primer all smashed in to 2.840 COAL.</p><p></p><p>Stay tuned....</p><p>(PS - on the advice of one of the early posts, I took my barreled action out of the stock, cleaned out the lug cavity with compressed air, wiped down the action, and reassembled and torqued the action screws to 30 inch pounds. Seems to have cleared up some of the extreme horizontal scattering. Thanks for that!)</p></blockquote><p></p>
[QUOTE="frankinaustin, post: 1116341, member: 71931"] Hello everyone - thanks to all for your valued insights! I conducted a second ladder and used the exact same brass, loads, etc. Below is a pic of my first target and my second (1 week later) target. I'm going to now work on seeing if I get good groups with loads 2, 8, and 10, which are 39.1, 40.9, and 41.5 gr of Varget under 140 gr Nos BT Combined Technology with Neck Sized Lapua 708 brass, BR2 primer all smashed in to 2.840 COAL. Stay tuned.... (PS - on the advice of one of the early posts, I took my barreled action out of the stock, cleaned out the lug cavity with compressed air, wiped down the action, and reassembled and torqued the action screws to 30 inch pounds. Seems to have cleared up some of the extreme horizontal scattering. Thanks for that!) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm-08 Ladder test to 300 yrds - what do I have?
Top