Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
7 STW with tight/minimum headspace
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="GuySutton" data-source="post: 1556099" data-attributes="member: 108801"><p>I agre with sedancowboy,you have a short chamber which is ok,you first need to make sure your die contact de Shell holder thight ,and then you resize your brass and see if it is chamber ok,if not you can try a .005 thousand shim under the head of your brass,if it is ok you can have your Shell holder grind ,010 thousand on the top of the Shell holder at a local machine shop it will be much cheeper then having a smith reaming your thight chamber, off course when you will intall your resizing die just make a light contact at first and adjust your die to chamber your round freely, I have to 308 with sbort chamber and a 7mm WSM ,.and this is how y correct the problem,</p></blockquote><p></p>
[QUOTE="GuySutton, post: 1556099, member: 108801"] I agre with sedancowboy,you have a short chamber which is ok,you first need to make sure your die contact de Shell holder thight ,and then you resize your brass and see if it is chamber ok,if not you can try a .005 thousand shim under the head of your brass,if it is ok you can have your Shell holder grind ,010 thousand on the top of the Shell holder at a local machine shop it will be much cheeper then having a smith reaming your thight chamber, off course when you will intall your resizing die just make a light contact at first and adjust your die to chamber your round freely, I have to 308 with sbort chamber and a 7mm WSM ,.and this is how y correct the problem, [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
7 STW with tight/minimum headspace
Top