Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
6.5prc to 7saum conversion?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="IHFarmer07" data-source="post: 2631702" data-attributes="member: 75397"><p>I borrowed a reamer from a very nice guy to open the base of the 6.5prc case at the .200" datum line and I also ordered a Hornady custom die to shrink in down even more. Through out the whole clicker issue of the 6.5prc, some have mentioned Hornady being good at making a custom die to what YOU want. With doing so, you don't have a warranty. I don't remember the sizes I went with but I can look at the die box and it will have the information on it for the dimensions. If anyone needs that, pm me. </p><p>What I do to not break the die is I first FL resize with a forester die, trim, debur ID OD neck turn then size back down with the Hornady so it don't have all the stress on the die from just fired to .528 or whatever. I'm wanting to say I had them make it for .528 then with spring back it's around.529". Have to measure and look.</p></blockquote><p></p>
[QUOTE="IHFarmer07, post: 2631702, member: 75397"] I borrowed a reamer from a very nice guy to open the base of the 6.5prc case at the .200” datum line and I also ordered a Hornady custom die to shrink in down even more. Through out the whole clicker issue of the 6.5prc, some have mentioned Hornady being good at making a custom die to what YOU want. With doing so, you don’t have a warranty. I don’t remember the sizes I went with but I can look at the die box and it will have the information on it for the dimensions. If anyone needs that, pm me. What I do to not break the die is I first FL resize with a forester die, trim, debur ID OD neck turn then size back down with the Hornady so it don’t have all the stress on the die from just fired to .528 or whatever. I’m wanting to say I had them make it for .528 then with spring back it’s around.529”. Have to measure and look. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
6.5prc to 7saum conversion?
Top