Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 SAUM N570 140 Berger
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="eshorebwhntr" data-source="post: 1978637" data-attributes="member: 17112"><p>Good to know. I'm not on Facebook. I'll have to see if I can view the info without joining. </p><p></p><p>I'm surprised you maxed out with retumbo and the 150s @58grs. I was at 58.5gr H1000 with the 150. Plus, you have a bit more freebore which I thought would have helped some. Typically whatever my max is with h1000 I can figure on going minimum another grain higher with retumbo before pressuring out. I had good accuracy with the 150, just odd random fliers that I attributed to not having enough twist. </p><p></p><p>One of the attributes of the 8133 I'd read about was the anti-coppering agents. What is your experience? How bad is the carbon fouling? </p><p></p><p>I hadn't cleaned my SAUM in a while so I did a thorough cleaning after testing the 570. Seemed like more carbon than normal compared to 1000. Going to keep an eye out on that. </p><p></p><p>The only other thing I wished was that 570 came in "SC" or "SSC". It does not flow through the powder funnel well at all. I have the Area419 aluminum set and this is the first powder I've ever had not flow through like water. Small problem though.</p></blockquote><p></p>
[QUOTE="eshorebwhntr, post: 1978637, member: 17112"] Good to know. I'm not on Facebook. I'll have to see if I can view the info without joining. I'm surprised you maxed out with retumbo and the 150s @58grs. I was at 58.5gr H1000 with the 150. Plus, you have a bit more freebore which I thought would have helped some. Typically whatever my max is with h1000 I can figure on going minimum another grain higher with retumbo before pressuring out. I had good accuracy with the 150, just odd random fliers that I attributed to not having enough twist. One of the attributes of the 8133 I'd read about was the anti-coppering agents. What is your experience? How bad is the carbon fouling? I hadn't cleaned my SAUM in a while so I did a thorough cleaning after testing the 570. Seemed like more carbon than normal compared to 1000. Going to keep an eye out on that. The only other thing I wished was that 570 came in "SC" or "SSC". It does not flow through the powder funnel well at all. I have the Area419 aluminum set and this is the first powder I've ever had not flow through like water. Small problem though. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 SAUM N570 140 Berger
Top