Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC H1000 ELD-X Loads with Magnum Primers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="vancewalker007" data-source="post: 2622212" data-attributes="member: 66917"><p>A few years ago I ran a powder ladder on that combo with Hornady brass and CCI BR2 primers. I pressured out at 60gr. I think I had the bullet seated at 40 off so fairly safe. Your plan sounds good. If you plan to shoot your rifles highest powder node then maybe starting a little higher, like 57.8 or 58, will save some components. The load I settled on with this combo was 59.3gr H1000 at 30 off. It shot very good around 1/2 MOA with a velocity of 3120fps out of a 26in barrel.</p></blockquote><p></p>
[QUOTE="vancewalker007, post: 2622212, member: 66917"] A few years ago I ran a powder ladder on that combo with Hornady brass and CCI BR2 primers. I pressured out at 60gr. I think I had the bullet seated at 40 off so fairly safe. Your plan sounds good. If you plan to shoot your rifles highest powder node then maybe starting a little higher, like 57.8 or 58, will save some components. The load I settled on with this combo was 59.3gr H1000 at 30 off. It shot very good around 1/2 MOA with a velocity of 3120fps out of a 26in barrel. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC H1000 ELD-X Loads with Magnum Primers
Top