Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC Ejector Mark - Factory Ammo
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="5RWill" data-source="post: 1398861" data-attributes="member: 98561"><p>It's to note if you're using H1000 there was a lot of talk of Carbon rings being built up in the throat of the 6.5 SAUM that would spike pressure. Both on the FB group and the Hide. Would be a good question to ask on the FB group too as George, Scott, and Pat frequent that group and have probably more experience with the 6.5 PRC/SAUM than anyone that's been loading for it since it's official release. I've had some spikes with dad's gun that i didn't anticipate that were to my knowledge well below max. I've got to clean it before we shoot the 143gr ELD-X out of it. I'll recommend going with something like 7977 or RL26 something that isn't so sooty/dirty if it's going to be shot a lot. FWIW to my knowledge the enduron line 4451, 4166, and 7977 is basically a cleaner burning generic to H4350, Varget, and H1000. My experience with 4451 and 4166 in both my 6.5x47s seems to mirror just that. I've followed Varget and H4350 load data to the T in finding loads and it's very very similar.</p></blockquote><p></p>
[QUOTE="5RWill, post: 1398861, member: 98561"] It's to note if you're using H1000 there was a lot of talk of Carbon rings being built up in the throat of the 6.5 SAUM that would spike pressure. Both on the FB group and the Hide. Would be a good question to ask on the FB group too as George, Scott, and Pat frequent that group and have probably more experience with the 6.5 PRC/SAUM than anyone that's been loading for it since it's official release. I've had some spikes with dad's gun that i didn't anticipate that were to my knowledge well below max. I've got to clean it before we shoot the 143gr ELD-X out of it. I'll recommend going with something like 7977 or RL26 something that isn't so sooty/dirty if it's going to be shot a lot. FWIW to my knowledge the enduron line 4451, 4166, and 7977 is basically a cleaner burning generic to H4350, Varget, and H1000. My experience with 4451 and 4166 in both my 6.5x47s seems to mirror just that. I've followed Varget and H4350 load data to the T in finding loads and it's very very similar. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC Ejector Mark - Factory Ammo
Top