I spent today doing some work on a load for my 6.5 PRC. I started with groups of 3 at a charge I was comfortable with.
ADG virgin
N565
CCI 250
3x 2.165 CBTO
3x 2.135 CBTO
3x 2.105 CBTO
I then determined 2.135 would be my start point based on target.
I then loaded the following
55.8 - 56 - 56.2 - 56.4 - 56.6 - 56.8 - 57 - 57.2 - 57.4
I was getting some crunch on 57.2 and I elected to stop at 57.4
Back to the range:
2791
2806
2791
2820
2827
2839
2845
2878
2877
I am new at this point but I think I see faint ejector marks at 57-57.4 but bolt operated fine. I tried to capture what I am seeing but maybe it's not coming through.
Questions:
Would you keep pressing for more fps?
Do you see concerns with these spent primers?
Any data spots jumping out on my ladder(55.8 and maybe 57.2 look interesting to me)?
I have a reference point on some custom ammo I was shooting last year. 2769fps and a CBTO 2.137. But I kinda want more juice:
Thoughts/opinions
ADG virgin
N565
CCI 250
3x 2.165 CBTO
3x 2.135 CBTO
3x 2.105 CBTO
I then determined 2.135 would be my start point based on target.
I then loaded the following
55.8 - 56 - 56.2 - 56.4 - 56.6 - 56.8 - 57 - 57.2 - 57.4
I was getting some crunch on 57.2 and I elected to stop at 57.4
Back to the range:
2791
2806
2791
2820
2827
2839
2845
2878
2877
I am new at this point but I think I see faint ejector marks at 57-57.4 but bolt operated fine. I tried to capture what I am seeing but maybe it's not coming through.
Questions:
Would you keep pressing for more fps?
Do you see concerns with these spent primers?
Any data spots jumping out on my ladder(55.8 and maybe 57.2 look interesting to me)?
I have a reference point on some custom ammo I was shooting last year. 2769fps and a CBTO 2.137. But I kinda want more juice:
Thoughts/opinions