Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="deathwobble" data-source="post: 757408" data-attributes="member: 51173"><p>Anyone have ever ran into any problems when necking down 30-06 brass to 6.5-06 with redding s dies. When I set up the bullet seating die I cannot set it up to touch the shell plate because when I seat the bullet the shoulder area of my brass comes onto contact with the die causing a ripple on the shoulder which is screwing with the head spacing and not allowing the bolt to close.</p><p>I also ran the expander plug several times though the brass to get rid of the small lump on the inside of brass near the mouth shoulder area that you get when necking down. so thats not the issue. The only thing that seems to remedy this is to set the die up to not contact the shell plate. Anyone ever had an issue like this? Its driving me crazy</p><p> </p><p>Set up:</p><p>Action: Rem 700LA ss Blueprinted and Trued</p><p>Barrel: 26" Brux #17 heavy varmit w/Scorehigh tac muzzle break</p><p>Caliber: 6.5-06, .294 neck</p><p>Stock: B-C A3 w/glass bed job and wyatts BDM</p><p>Glass: Vortex RazorHD ebr 2b</p></blockquote><p></p>
[QUOTE="deathwobble, post: 757408, member: 51173"] Anyone have ever ran into any problems when necking down 30-06 brass to 6.5-06 with redding s dies. When I set up the bullet seating die I cannot set it up to touch the shell plate because when I seat the bullet the shoulder area of my brass comes onto contact with the die causing a ripple on the shoulder which is screwing with the head spacing and not allowing the bolt to close. I also ran the expander plug several times though the brass to get rid of the small lump on the inside of brass near the mouth shoulder area that you get when necking down. so thats not the issue. The only thing that seems to remedy this is to set the die up to not contact the shell plate. Anyone ever had an issue like this? Its driving me crazy Set up: Action: Rem 700LA ss Blueprinted and Trued Barrel: 26" Brux #17 heavy varmit w/Scorehigh tac muzzle break Caliber: 6.5-06, .294 neck Stock: B-C A3 w/glass bed job and wyatts BDM Glass: Vortex RazorHD ebr 2b [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 help
Top