• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED 338 edge

shooter72

Well-Known Member
Joined
Jan 19, 2016
Messages
414
Don't really want to move this but need some cash to finish project at house. Gun was all new to this build (stock was only thing purchased used) Build by Dave Bruno from PA so you know everything is top notch.
Remington Action (trued) Heavy recoil lug
NF 20 MOA base
Remington trigger by Dave (1lbs) works great has safety
Krieger barrel 30" cerekoted black has really efficient brake (75 round break in)
XLR evolution stock camo painted (paint has a couple marks not too bad)
Whidden dies new for this build
100 pieces completely prepped UNFIRED norma brass (I did break in with nosler brass)
approx 400 Hornaday 285 ELD-M bullets

Scope, rings, Bipod not included - $3150 shipped
Gun is an out of this world shooter. consistently at 100 yards during load development has been under 3/4 of an inch. the sweet spot has been 1/4" at 100 with great ES numbers. all load data will go to the buyer. If I end up getting my project done before someone buys this I am gonna pull it down and keep it.
 

Attachments

  • EDGE.jpg.jpg
    EDGE.jpg.jpg
    351.3 KB · Views: 25
  • EDGE1.jpg.jpg
    EDGE1.jpg.jpg
    348.3 KB · Views: 21
  • EDGERANGE.jpg.jpg
    EDGERANGE.jpg.jpg
    333.5 KB · Views: 33
  • EDGERANGE1.jpg.jpeg
    EDGERANGE1.jpg.jpeg
    247 KB · Views: 22
ONLY 75 rounds fired out of this beast! Will add an ATACR 30MOA per revolution to the deal for an additional $2000.
 
What kind of speed where you getting out of those 285gr honrady? How did they shoot past 100yards?
 
2925fps

I only took this gun out long once. testing looks like it's going to stay sub 1/2 MOA out to at least 1200 yards. I am sure it is a shooter from the limited time I spent with it though.
 
Awesome, if I wouldn't of spent over $2,000 on my current 338 edge build I'd be able to make an offer, if you want to possibly sell the bullets separate I'd be interested in that, what coal are you using for them?
 
I actually want to keep the bullets. only way I am selling them is if the person absolutely wants it all.
I am running them at 3.783 (they are down in the case more than I usually run them but I couldn't argue with the performance)
 
That makes sense, I was thinking of going with the 300gr Berger but the coal would be like 3.90 or close to 4 from what I read, and my dads 338 lapua shoots the hornady really well so I figured I'd go with them, and be able to shoot in that 3.7-3.85 range that a cip magazine will allow; thanks for the info and good luck with the sale!!
 
$2700 - GUN, BRASS, DIES
$4800 - I will add the ATACR I have and the Bipod
 
Top