Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
338 EDGE @3146 with 300 Berger
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="LongBomber" data-source="post: 983263" data-attributes="member: 14435"><p>I have an edge AI (40 deg shoulder) and run a oal of 4.100" with the 300 hybrid. I ran into sticky extraction and primer pockets done in 2 firings (nosler brass) at 94gr H1000, I also had nose slump with the gen 1 bullets at 94gr. No matter as 91.5gr gives me the most consistent vertical dispersion. With 91.5gr I got 2940fps over a chrony beta, which lines up well with my drops out 1000. The speed seems high for the powder charge, especially since I have a tad more boiler room than most edges with a very long OAL.</p></blockquote><p></p>
[QUOTE="LongBomber, post: 983263, member: 14435"] I have an edge AI (40 deg shoulder) and run a oal of 4.100" with the 300 hybrid. I ran into sticky extraction and primer pockets done in 2 firings (nosler brass) at 94gr H1000, I also had nose slump with the gen 1 bullets at 94gr. No matter as 91.5gr gives me the most consistent vertical dispersion. With 91.5gr I got 2940fps over a chrony beta, which lines up well with my drops out 1000. The speed seems high for the powder charge, especially since I have a tad more boiler room than most edges with a very long OAL. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
338 EDGE @3146 with 300 Berger
Top
