338 edge $1250

[briannelson89]

I have a 338 edge built on a new emington 700 action. I picked the barrel up here as a take off with less than 200 rounds through it. My smith re cut the chamber with a standard ptg reamer. The barrel is a Brux #3 26in 10 twist with Gentry quiet brake. The rifle is setting in a McMillan game scout standard fill marble color. I have fired the rifle less than 25 rounds since I had it put together. Its shot .5 moa with the first load with a 250 eol I tried. The trigger is a Remington trigger that was tuned to 2lbs. I have since picked up a wyatt's extended box for the rifle but I have not had it installed yet. I'll have to weigh the rifle again but I'm thinking it's in the mid 7lb range. Also the markings on the barrel didn't line up they are now upside down $1250 plus the ride.

 

[grouse]

That's a great deal

 

[cohunt]

Thread size?

 

[briannelson89]

5/8×24 I believe. I'll double check.

 

[cohunt]

Brux web page says at 24" a #3 profile is .630, at 26" might not be enough for 5/8-- that's why I asked.

 

[briannelson89]

You are correct. Its threaded 9/16×24

 

[codyadams]

Tag. I have a friend that may be interested.

 

[Chris Melink]

Interested.. Shoot me a text 208-996-5188

 

[briannelson89]

Ttt

 

[Elkeater]

Any idea on velocity of those 250 EOL's?

 

[briannelson89]

Open to trades or offers

 

[Creekrat]

Was any work done to the action or is it an off the shelf piece?

 

[briannelson89]

Off the shelf

 

[BS Shooter]

Off because sold or change of heart? Only asking because of serious interest.