Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WSM case issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BountyHunter" data-source="post: 960826" data-attributes="member: 12"><p>I have also seen this several times with a die being reamed too deep AND if you adjust for cam over, you bump the shoulder back too far and it actually bulges the shoulder junction with the body out far enough it will not chamber. </p><p> </p><p>Start the die about 1/4 off the shellholder and come down 1/4 turn at a time until it chambers. </p><p> </p><p>If it will not chamber after that, then it is too short and you have to use the Redding competition shellholders that are up to .010 shorter than standard shellholders and allow another .010 bump or have about .015-.020 cut off the bottom of the die.</p></blockquote><p></p>
[QUOTE="BountyHunter, post: 960826, member: 12"] I have also seen this several times with a die being reamed too deep AND if you adjust for cam over, you bump the shoulder back too far and it actually bulges the shoulder junction with the body out far enough it will not chamber. Start the die about 1/4 off the shellholder and come down 1/4 turn at a time until it chambers. If it will not chamber after that, then it is too short and you have to use the Redding competition shellholders that are up to .010 shorter than standard shellholders and allow another .010 bump or have about .015-.020 cut off the bottom of the die. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WSM case issue
Top