Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WM (Beginner)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TMill308" data-source="post: 2332884" data-attributes="member: 92888"><p>I just worked up this combination a couple of weeks ago, because I am running out of H1000 and Bergers and have plenty of H4831SC and 200 ELDX's. 600 yard ladder from 68 to 72.5 grains of H4831SC and the 200 ELDX, worked up in half grain increments. No pressure signs at the top but the node was just under that in my rifle. Did seating depth testing and 20 thousandths off the lands shot a three shot group under a half MOA. I called it good, but still need to verify at distance. I havent chronoed it yet, but based on the drops it should be right at 2900FPS. Rifle is a new Browning XBolt LR Stalker. My COL was about what yours is and H1000 was too heavily compressed. The magazine is limited to about 3.6 inches in this rifle, so this gives me a little wiggle room.</p></blockquote><p></p>
[QUOTE="TMill308, post: 2332884, member: 92888"] I just worked up this combination a couple of weeks ago, because I am running out of H1000 and Bergers and have plenty of H4831SC and 200 ELDX's. 600 yard ladder from 68 to 72.5 grains of H4831SC and the 200 ELDX, worked up in half grain increments. No pressure signs at the top but the node was just under that in my rifle. Did seating depth testing and 20 thousandths off the lands shot a three shot group under a half MOA. I called it good, but still need to verify at distance. I havent chronoed it yet, but based on the drops it should be right at 2900FPS. Rifle is a new Browning XBolt LR Stalker. My COL was about what yours is and H1000 was too heavily compressed. The magazine is limited to about 3.6 inches in this rifle, so this gives me a little wiggle room. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WM (Beginner)
Top