Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="pawhitetail" data-source="post: 3034329" data-attributes="member: 92982"><p>Just wanted to do an update on what I found. MagnumManiac is the winner for this topic. I took one case that barely chambered and one that didn't chamber and colored a ring around the case right above the belt with a black sharpie marker. This is definitely where the brass is hitting the chamber. I contacted another member on here and am buying a larry willis collet die. This die is made to deal with exactly this issue. Thanks again guys</p><p></p><p>I just updated my findings yesterday. If it is a die issue there's no adjustment left as I did try what was suggested here as to putting paper under the case to take up the slack in the shell holder ensuring the brass is going into the die as far as possible without machining the shell holder. Which I believe if I was to do that the die would bump the shoulder back even further. The sharpie marker left no doubt that the cases are getting tight right in front of the belt. The rifle is a weatherby vanguard first gen.</p></blockquote><p></p>
[QUOTE="pawhitetail, post: 3034329, member: 92982"] Just wanted to do an update on what I found. MagnumManiac is the winner for this topic. I took one case that barely chambered and one that didn't chamber and colored a ring around the case right above the belt with a black sharpie marker. This is definitely where the brass is hitting the chamber. I contacted another member on here and am buying a larry willis collet die. This die is made to deal with exactly this issue. Thanks again guys I just updated my findings yesterday. If it is a die issue there's no adjustment left as I did try what was suggested here as to putting paper under the case to take up the slack in the shell holder ensuring the brass is going into the die as far as possible without machining the shell holder. Which I believe if I was to do that the die would bump the shoulder back even further. The sharpie marker left no doubt that the cases are getting tight right in front of the belt. The rifle is a weatherby vanguard first gen. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby issue
Top