Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 RUM load development questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="RUMBALL" data-source="post: 777489" data-attributes="member: 53976"><p>Hi guys</p><p>Im sorry for jumping in on this thread but im having some issues with my loads for my rum I use redding s type match dies which has the neck bushing die,I have been using it without the expander ball and going down in stages to my desired neck tension.</p><p>As the rifle is factory sendero bedded,1.4lb trigger muzzle brake I dont think its the cause of the inconsistant accuracy so im assuming my reload practice.</p><p>From what I have read here so far I would be better off with a full length bushing die and use the expander ball .</p><p>Im using nosler brass truing necks before loading virgin brass get good results at the range then after fire formed clean brass neck size.</p><p>Commence tweeking data from new brass session sort out load now after cleaning this brass and neck sizing and reloading next time out the load is not as tight.</p><p>All cleaning practices in place and no long shot strings have checked scope rings and checked acti8n screws set them at 45in lbs.</p><p>So I guess what im asking are my thoughts on fl sizing the way to go before i go buy 4 fl bushing dies as I have 4 sets of these dies.</p><p>Cheers</p><p>Rumball.</p></blockquote><p></p>
[QUOTE="RUMBALL, post: 777489, member: 53976"] Hi guys Im sorry for jumping in on this thread but im having some issues with my loads for my rum I use redding s type match dies which has the neck bushing die,I have been using it without the expander ball and going down in stages to my desired neck tension. As the rifle is factory sendero bedded,1.4lb trigger muzzle brake I dont think its the cause of the inconsistant accuracy so im assuming my reload practice. From what I have read here so far I would be better off with a full length bushing die and use the expander ball . Im using nosler brass truing necks before loading virgin brass get good results at the range then after fire formed clean brass neck size. Commence tweeking data from new brass session sort out load now after cleaning this brass and neck sizing and reloading next time out the load is not as tight. All cleaning practices in place and no long shot strings have checked scope rings and checked acti8n screws set them at 45in lbs. So I guess what im asking are my thoughts on fl sizing the way to go before i go buy 4 fl bushing dies as I have 4 sets of these dies. Cheers Rumball. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 RUM load development questions
Top