Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
300 PRC barrel length
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote=".gacton" data-source="post: 1685763" data-attributes="member: 103805"><p>I built mine with a Bartlein 1:8 twist, in a trued 700 action. Settled on 26". Used an old A5 stock, had the long DBM installed to run up to 3.700 c.o.a.l. and it feeds fine. Initial testing and barrel break in with 225 ELDX over 75 gr. of H1000 giving just over 1" groups @100 yds., with a velocity of 2870. About ready to start actual load development with the 225's, and a 230 Sierra. Hope that helps.</p></blockquote><p></p>
[QUOTE=".gacton, post: 1685763, member: 103805"] I built mine with a Bartlein 1:8 twist, in a trued 700 action. Settled on 26". Used an old A5 stock, had the long DBM installed to run up to 3.700 c.o.a.l. and it feeds fine. Initial testing and barrel break in with 225 ELDX over 75 gr. of H1000 giving just over 1" groups @100 yds., with a velocity of 2870. About ready to start actual load development with the 225's, and a 230 Sierra. Hope that helps. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
300 PRC barrel length
Top