Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-28 Nosler Wildcat
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BoatTail" data-source="post: 1272194" data-attributes="member: 74670"><p>Kris</p><p></p><p>You are right load I gave in my previous thread for comparison from the Nosler manual was for 200gr Accubond and Partition and not the ABLR.</p><p></p><p>The Nosler manual shows the 210 gr ABLR in 30 Nosler with 79grs of RL26 reaching 3017fps.</p><p></p><p>I would run your load through my Quickload software but I don't have a 210 ABLR bullet programed in.</p><p></p><p>With the 30-28 Nosler you should be able to get close to or possibly reach 3100fps. Just watch your pressure signs.</p><p></p><p>If you can get Remington brand 300 Ultra Mag I would use it instead of Nosler or Norma. It is a harder case and holds more H20 thus will have lower pressures and allow more powder to reach a higher velocity.</p><p></p><p>By the way I ordered a 4 die reforming die set from Hornady to reform 300 Ultra mag brass. If you don't have one you will need it. You will have to send Hornady your cartridge print and a couple parent cases. They work well and I use them for both my 28 Nosler and 30-28 Nosler. Built for the 28 Nosler I just substitute my last 28 Nosler reforming die with my 30-28 Nosler sizing die that Hornady also built for me.</p><p></p><p>Good Luck!</p><p></p><p>Bruce</p></blockquote><p></p>
[QUOTE="BoatTail, post: 1272194, member: 74670"] Kris You are right load I gave in my previous thread for comparison from the Nosler manual was for 200gr Accubond and Partition and not the ABLR. The Nosler manual shows the 210 gr ABLR in 30 Nosler with 79grs of RL26 reaching 3017fps. I would run your load through my Quickload software but I don't have a 210 ABLR bullet programed in. With the 30-28 Nosler you should be able to get close to or possibly reach 3100fps. Just watch your pressure signs. If you can get Remington brand 300 Ultra Mag I would use it instead of Nosler or Norma. It is a harder case and holds more H20 thus will have lower pressures and allow more powder to reach a higher velocity. By the way I ordered a 4 die reforming die set from Hornady to reform 300 Ultra mag brass. If you don't have one you will need it. You will have to send Hornady your cartridge print and a couple parent cases. They work well and I use them for both my 28 Nosler and 30-28 Nosler. Built for the 28 Nosler I just substitute my last 28 Nosler reforming die with my 30-28 Nosler sizing die that Hornady also built for me. Good Luck! Bruce [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-28 Nosler Wildcat
Top