Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
280ai clickers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="spin-one" data-source="post: 2478269" data-attributes="member: 114885"><p>I have a 6.5 PRC that developed the dreaded clickers caused by too tight of SAANI tolerance. I have ordered a custom reamer to correct this issue so I am familiar with the problem. I have a semi custom 280ai built off a Winchester model 70. I purchased 100 pieces of Nosler brass because it was all that was available at the time. I fired all 100 at a mid range charge so as to form to my chamber. On the second firing during load development it started getting a slight bolt click. I am using 60.0gr of H4831sc so I am not running too hot of a load. It doesn't make a difference what charge load I use. I am not aware of the 280ai developing a bolt click issue. I have heard the Nosler brass is soft so I was wondering if this could be a factor in developing a slight bolt click?</p><p></p><p>Thanks</p><p>Scott</p></blockquote><p></p>
[QUOTE="spin-one, post: 2478269, member: 114885"] I have a 6.5 PRC that developed the dreaded clickers caused by too tight of SAANI tolerance. I have ordered a custom reamer to correct this issue so I am familiar with the problem. I have a semi custom 280ai built off a Winchester model 70. I purchased 100 pieces of Nosler brass because it was all that was available at the time. I fired all 100 at a mid range charge so as to form to my chamber. On the second firing during load development it started getting a slight bolt click. I am using 60.0gr of H4831sc so I am not running too hot of a load. It doesn't make a difference what charge load I use. I am not aware of the 280ai developing a bolt click issue. I have heard the Nosler brass is soft so I was wondering if this could be a factor in developing a slight bolt click? Thanks Scott [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
280ai clickers
Top