Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
28 nosler help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Doc88" data-source="post: 1338861" data-attributes="member: 98886"><p>I had this very same problem with a a 28 Nosler I purchased here on the forum. The load I was given was the same as yours. I called the smith that made the gun and this is what he said. Clean the heck out of the barrel. RL33 dirties up fast and will cause pressure spikes and velocity spreads in a dirty barrel. Back off the load a couple of grains and rework your load. He recommended a 400yd ladder test at .2gr increments. My new load ended up being 85.8gr and considerable improvement in accuracy. Holes touching accuracy at 100yds. Velocity is about 3120. The smith recommended clean the barrel with Bore Tec Eliminator dry swab then scrub with Remington 40x bore cleaner. Dry swab then a little oil. The smith also stated some of his guns like 3140+ fps and some like 3100-3115 fps. Ryan Pierce is the smith I'm talking about and was very helpful. Good luck.</p></blockquote><p></p>
[QUOTE="Doc88, post: 1338861, member: 98886"] I had this very same problem with a a 28 Nosler I purchased here on the forum. The load I was given was the same as yours. I called the smith that made the gun and this is what he said. Clean the heck out of the barrel. RL33 dirties up fast and will cause pressure spikes and velocity spreads in a dirty barrel. Back off the load a couple of grains and rework your load. He recommended a 400yd ladder test at .2gr increments. My new load ended up being 85.8gr and considerable improvement in accuracy. Holes touching accuracy at 100yds. Velocity is about 3120. The smith recommended clean the barrel with Bore Tec Eliminator dry swab then scrub with Remington 40x bore cleaner. Dry swab then a little oil. The smith also stated some of his guns like 3140+ fps and some like 3100-3115 fps. Ryan Pierce is the smith I'm talking about and was very helpful. Good luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
28 nosler help
Top