• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED 22-250AI Savage barrel + headspace gauges

dk17hmr

Well-Known Member
Joined
Nov 15, 2009
Messages
303
Location
Wyoming
1. Savage small shank 24" 22-250AI with PTG go/no go gauges. I believe it's an ER shaw barrel. Used this as a fire forming barrel, shot alot of round through it and would dump water on it to get it cooled down,. Don't know how it shoots but there's still rifling in there $130 shipped with the gauges and barrel nut.......SPF

2. CBI 26" Remage 308 Winchester with Clymer go/no go gauges, threaded 5/8x24 at the muzzle 1:10 twist, PVA barrel nut 600ish rounds through it shot 1/2 to 3/4" groups from a bipod with a 10x when I pulled it off $225 shipped.......SOLD

3. 16" KAK industries 458 socom Remage barrel, barrel nut, flash hider, 5/8x24 threaded muzzle with 1:14 twist rifling
Hornady Full Length sizer, Hornady seater, Lee Factory Crimp, and a Lee trimming stud
50pcs of New unfired brass, 101 pieces of 1-3x fired brass

This barrel fits Remington 700s with 308 sized bolt faces and uses a barrel nut for headspacing. I have only shot this barrel with cast bullets, mostly suppressed sub sonics, somewhere in the neighborhood of 250-275 rounds on the barrel. The group in the picture is from 100 yards with 320gr cast hollow points at 1785fps, very typical group for me shooting it with supers 1.5-2" depending on the day. Subsonic 400+ grain bullets do about the same. There are some marks on the parkerized finish from my barrel vise. I can take better pics if needed. $325 shipped.....SOLD
 

Attachments

  • KIMG1898.JPG
    KIMG1898.JPG
    789 KB · Views: 26
  • KIMG1894.JPG
    KIMG1894.JPG
    995 KB · Views: 23
  • KIMG1897.JPG
    KIMG1897.JPG
    287.7 KB · Views: 21
Last edited:
Top