Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
212 ELD-X 300 Win Mag Powder Crunch
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="waveslayer" data-source="post: 1722417" data-attributes="member: 46202"><p>Ok sorry for the delay, I was at a wedding.</p><p></p><p>So according to QL you are way over pressured with your current load with new brass. Max pressure with what you provided says you are at 67,171... that's high. Any pressure signs at all? </p><p></p><p>So for your information, I'm not recommending anything, but with that large case volume increase you need to add for all once fired brass a total of 75 grains of H1000 to match your new brass...</p><p></p><p>Now according to OBT you are not in your node, which means you need to do a new load work up. </p><p></p><p>You can try with your current once fired brass and let me know the results using 71.5 grains . You should see velocity around 2794.</p><p></p><p>What are you using for a chrono? </p><p></p><p>Here is where your nodes should be at, see attached</p></blockquote><p></p>
[QUOTE="waveslayer, post: 1722417, member: 46202"] Ok sorry for the delay, I was at a wedding. So according to QL you are way over pressured with your current load with new brass. Max pressure with what you provided says you are at 67,171... that's high. Any pressure signs at all? So for your information, I'm not recommending anything, but with that large case volume increase you need to add for all once fired brass a total of 75 grains of H1000 to match your new brass... Now according to OBT you are not in your node, which means you need to do a new load work up. You can try with your current once fired brass and let me know the results using 71.5 grains . You should see velocity around 2794. What are you using for a chrono? Here is where your nodes should be at, see attached [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
212 ELD-X 300 Win Mag Powder Crunch
Top