hoolege06
Member
Hi y'all,
Selling a 20x47 Lapua I had custom built early this year.
Barrel - Benchmark 18" fluted, threaded for suppressor. Had the guys at Benchmark specifically choose this barrel for the gun.
Action - Surgeon 591 SA
Trigger - Jewel set at 1.2lbs
Stock - McMillan
Glass bedded.
I've put just over 100 rounds down the tube and it shoots 55 grain Bergers with 34 grains of H4350 well under 1/2 MOA (I have a pic I can send to prove it). I haven't had a chance to mess with the load to much to get speeds higher, plus I didn't want to burn out my barrel so I like to keep it around 3400-3500fps. All in all I am $4700 into the gun and would entertain any reasonable offer. I got nothing but the best for this gun.
To sweeten the pot I am also including my reloading supplies of about 400-500 rounds of 55gr Berger, 100 never fired Lapua brass (resized but need the necks turned) along with 15-20 brass I have shot with that are ready to load, Possum Hollow bore guide and a Wilson Seater Die specifically for the 20x47.
I am selling this because it sits in my closet and I don't use it or hunt Coyotes (the reason I built it) as much as I was hoping to have time for. It's an expensive paper weight and I figure someone else would get a lot more use out of it, especially if you've got a suppressor it's awesome. Which is another reason I'm selling it, I don't have a suppressor and probably won't anytime soon.
I can be reached here or at 801-358-6290 or [email protected]. My job keeps me busy so I will respond to any questions asap.
Thanks for taking a look.
Colby
Selling a 20x47 Lapua I had custom built early this year.
Barrel - Benchmark 18" fluted, threaded for suppressor. Had the guys at Benchmark specifically choose this barrel for the gun.
Action - Surgeon 591 SA
Trigger - Jewel set at 1.2lbs
Stock - McMillan
Glass bedded.
I've put just over 100 rounds down the tube and it shoots 55 grain Bergers with 34 grains of H4350 well under 1/2 MOA (I have a pic I can send to prove it). I haven't had a chance to mess with the load to much to get speeds higher, plus I didn't want to burn out my barrel so I like to keep it around 3400-3500fps. All in all I am $4700 into the gun and would entertain any reasonable offer. I got nothing but the best for this gun.
To sweeten the pot I am also including my reloading supplies of about 400-500 rounds of 55gr Berger, 100 never fired Lapua brass (resized but need the necks turned) along with 15-20 brass I have shot with that are ready to load, Possum Hollow bore guide and a Wilson Seater Die specifically for the 20x47.
I am selling this because it sits in my closet and I don't use it or hunt Coyotes (the reason I built it) as much as I was hoping to have time for. It's an expensive paper weight and I figure someone else would get a lot more use out of it, especially if you've got a suppressor it's awesome. Which is another reason I'm selling it, I don't have a suppressor and probably won't anytime soon.
I can be reached here or at 801-358-6290 or [email protected]. My job keeps me busy so I will respond to any questions asap.
Thanks for taking a look.
Colby
