• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

300 WSM Barrel, Remington 700 Long Action, and Drop-In DBM

JohnWess

Well-Known Member
Joined
Aug 21, 2018
Messages
330
Location
South Dakota
This is the same as listed here: https://www.longrangehunting.com/th...tion-300-wsm-barreled-action-split-up.229955/ However, I believe this is the more appropriate place.
Specs
Action
: Trued Remington 700 Long Action Mag Bolt Face *I had to have a slight amount material removed from the feed rails in order to make the WSM case feed properly. I have, however, put 7mm rem mag loaded rounds down in BDL mag box and although I obviously could not test it fully as a 300 WSM barrel is on the action, it did not seem to change how that would have functioned normally. SPF
Trigger
: Stock X-Mark Pro Adjustable Goes With Action
Barrel
: McGowen #2 Contour Remage 1-9" Twist 24" Muzzle Threaded 1/2"-28 TPI $250 OBO OR $300 With PTG Go/No-Go/Field Guages
DBM
: Long Action Legacy Sports Ammo Boost BDL Drop In DBM *The 300 WSM must be fed by DBM in order for it to feed properly in this setup. SPF
Let me know if you have any questions. Thanks.
upload_2019-11-15_17-17-50-png.158092

upload_2019-11-15_17-11-2-png.158086
 
Last edited:
Would the bottom metal work for a SAUM case?
I am not 100% sure. But, it is for a long action, so unless you built one on a long action, it's for sure a no. I am sorry this is the second time that happened. I should have made it more clear. I now corrected it in the post.
 
Ok, then I think it should work, as it fed the WSM fine, but not entirely sure. Let me do some checking and see if I can find out.
 

Recent Posts

Top