Axl
Well-Known Member
Sorry my bad. it was an elevation turret. I have the 4w reticle and use it for windage
Swarovski turret
- Thread starter Loggerdude
- Start date
Help Support Long Range Hunting Forum
I've had High Power Optics install aftermarket turrets on two Z5 3.5-18x scopes. No problems. Last scope was sent to them about 2 yrs ago.
You have to send your scope to High Power Optics. They install and return. But they don't do the BT Swaro models. Mine were Swaro BRH reticle models.
Their website explains the process reasonably well. If your scope already had one turret installed by HPO, they should be able to install the other one also. I had them do both windahe & elevation turrets.
Have no idea why they don't answer the phone. Send them an e-mail inquiry.
You have to send your scope to High Power Optics. They install and return. But they don't do the BT Swaro models. Mine were Swaro BRH reticle models.
Their website explains the process reasonably well. If your scope already had one turret installed by HPO, they should be able to install the other one also. I had them do both windahe & elevation turrets.
Have no idea why they don't answer the phone. Send them an e-mail inquiry.
Last edited:
Loggerdude
Well-Known Member
I should have more homework, I assumed
i have sent them three emails, maybe something happened out of their control. I appreciated the information, I'll try again next week.
i have sent them three emails, maybe something happened out of their control. I appreciated the information, I'll try again next week.
I already gave the info. Maybe call Swarovski, ask to speak to the owner
Do I understand correctly that you are wanting an EXPOSED windage turret on your Z5? No such thing exists.
The modification done by high power results in a capped, low profile turret like what you already have but with MOA markings.
The outdoorsmans only etches custom elevation rings for scopes already equipped with The Swarovski ballistic turret.
The answer you got from Swarovski is the correct one. The Z8 has an exposed turret accessory (called the BTF) that can be added to either the elevation or windage, or both. Nothing for the Z5
The modification done by high power results in a capped, low profile turret like what you already have but with MOA markings.
The outdoorsmans only etches custom elevation rings for scopes already equipped with The Swarovski ballistic turret.
The answer you got from Swarovski is the correct one. The Z8 has an exposed turret accessory (called the BTF) that can be added to either the elevation or windage, or both. Nothing for the Z5
Last edited:
Loggerdude
Well-Known Member
Yes, I finally got that information yesterday. Cameraland finally got me directly to the main tech at Swarovski. He said if theirs any modification done by anyone other than Swarovski it voids the warranty. I guess it's another scope probably a nightforce.thanks for everyone helping.
James DeTorre
Well-Known Member
Need a Z5 plain turret cap, help?
