WA Coyote

Check that the front base screw isn’t too long and bottoming-out before tightening. Front action screw can also be a touch long and...

Son' 1st bull elk. 315yds extreme up hill with seekins element 7prc and berger 175gr elite hunter. Normally use NAB in my rifles. The...

Good news is…….. Another couple ‘thou and you’ll be in the “Precision Hunter” range.

.0008 instrumental error, is 60% larger than your presumed level of accuracy of .0005. So, you are correct, that would indicate +/- 60%...

With a 60% margin of error.

Interesting…. From Mitutoyo's website: “Caliper Accuracy The measurement accuracy of the caliper, sometimes termed instrumental error...

What kind of calipers do y'all use to measure these rounds that are accurate to .0005"? Just for reference, .0005” is 1/8th the...

Understood Phil. If I were shooting BR or other group games, or if I were shooting antelope at 1500+ yards with a 6.5 Creed, I'd...

Gotcha, don’t see the runout. Seems like all the PRC stuff is loaded on the brink of sanity. No surprise on the primer pockets. What...

Were there runout readings on the original post? If there were, I failed to see them. What is your experience shooting the ammo in...

We’re not talking run out, we’re talking CBTO length. I would agree though, that runout is consistently a little better with the...

Dies don’t typically index off the ogive, they index off someplace between the ogive and the tip. On a 7mm die, that’s probably...

Certainly MOST handloaders use Wilson seaters. I’ve got a couple of Wilsons, they’re great. But honestly, the ammo they load isn’t any...

Yes, that's exactly what I'm saying, MOST handloaders. If you're really holding all your ammo to the exact same length, +/- .001", then...

Only .007 total variance with the Hunter ammo, with 90% being within .005 is pretty darn good. I'd venture that most handloads are about...