Recent content by w8n4rutnmt

To the top. Let's try $1200 shipped. Couple hundred off retail plus some lapua brass.

For sale: Savage 110 fcp in .338 lapua Rifle comes in original box. Has right around 200 rounds through it. Shoots H1000 and 300 grain berger hybrids at 1/2 moa. Comes with 24 once fired prepped and primed (cci 250) and 46 once fired lapua brass. $1,300.00. Shipped lower 48.

ill take it per pms

another pm sent

pm sent

Ttt

No bedding. Only sanded the first couple inches of the channel...didn't remove much. It was barely touching a sendero contour barrel

Full pic hopefully...bdl floor plate

Up for sale a bell and Carlson tactical medalist vertical grip for a long action Remington 700. Stock is in great shape, no scratches, dents or wear. I did have to open up the front of the barrel channel a bit. Tried to show in pic. $225 shipped. Money order preffered

Ill take it per our pms. Let me know if you got them, and about shipping info.

Thanks for all the replies. I will break the bolt down and clean as suggested and try shooting again. I hope that will do it so I don't have to pull all the loaded rounds and start again with new primers. I use the same primers in two different .300 win mags and have never had a problem...

Gun is a savage 110 fcp in .338 Lapua Using lapua brass, cci 250, H-1000 Last range session had 4 rounds not fire. Two loaded in new/unfired brass, two loaded in once fired brass. Primer had smaller "dimple" from firing pin than fired rounds do. Primer seating depth is consistent across...

I know most guys get torn apart for asking about hunting spots on forums, but I think this is a little different because of the difficulty even getting the tag. My cousin drew unit 313 for moose, and I was wondering if anyone has any info or tips on where to start. The only hunting I've done...

I agree with savageshtr about a 200 yard group. I have the same rifle, shoot the same bullet, brass, powder, and primer, and get the same 3/4 inch groups at 100 and 200. I started seating depth at max mag length and finished testing with 89.5 grains H-1000.

Found h-1000 and primers at last local shop today. No .338 bergers. AZSUGARBEAR: did not receive pm about bullets but interested. IDAHO SAWYER: let me know if you get down to your shop, I'd love to work something out with you for some 300 gr. bergers Thanks