Tandin93

Pm sent

My 9 year old killed her first this week! She made an absolutely perfect shot at 94yds!

Well, I can’t think of a better reason to get sidetracked! I’m sure those young men appreciated it! I think I’m going to try some this...

You ever get that load worked up?

RE23 is my absolute favorite, but I’m down to about 3 1/2lbs left and it looks like I won’t be able to get much more.. That’s why I’m...

This load was RL23 with 160 Accubonds It looks like that with some fine tuning, I could have a pretty good load here. I'm going to load...

Well, I guess you learn something new every day. I decided to seat some bullets .080 off the lands with the same exact powder charge and...

Question.. what is your COAL measurement?I realize this is very rifle specific, but I'd like to get some reference. The reason I'm...

Nice! I really like the 143HH.

I’ll give that a shot. Here is my brass from today. 58.2gn of 4831sc under AB 160’s Just under 1 moa Avg-2851 ES-24.3 SD-8.9

I ran into the same problem with longer monos’s. Although the best load I have found in my rifle is probably 143 hammer hunters over RL 23.

I'll definitely try the standards. I really think it's possibly a stiff ejector. I took it out to check and see if it had a burr, or...

Fired brass. Using CCI 250 primers. Only got a heavy bolt lift with 60gn of 4831sc. Other than that load, the only pressure sign I got...

This is what I was thinking, but I’m getting ejector marks on Peterson brass with anything over about 2875 with RL23 and 4831sc. I was...

Thanks for all the input! I’m going to try to pick up some n565 and try it. I have tried a few different bullets with 4831sc but my...