RugerHawg413's latest activity
-
RRugerHawg413 posted the thread Opinion on Barnes VOR-TX Factory Ammo in Rifles, Bullets, Barrels & Ballistics.Good Afternoon! A while back I found a really good deal on some factory Barnes VOR-TX factory ammo (as I don't yet reload myself), and...
-
RRugerHawg413 reacted to ChrisInKY's post in the thread How Far with a 7mm Rem Mag?-Elk Hunting with
Like.
I agree. 🥊 -
RRugerHawg413 reacted to Lee7588's post in the thread How Far with a 7mm Rem Mag?-Elk Hunting with Like.
Without energy you can have all the speed in the world but when your projectile hits its target it will just stop. Energy is what allows...
-
RRugerHawg413 reacted to southpa's post in the thread How Far with a 7mm Rem Mag?-Elk Hunting with Like.
My 7mags with 180s are carrying 1500-1600 ft pounds out to about 1200 yards with right at 2000fps at my hunting elevation. I'm happy...
-
RRugerHawg413 reacted to Varmint Hunter's post in the thread Please Help!-Muzzle Break Install with Like.
I use locking lug lube which you should already have on hand.
-
RRugerHawg413 reacted to Laelkhunter's post in the thread Please Help!-Muzzle Break Install with Like.
I use Anti Seize lube on mine. It is golden brown looking, I think it's made by Loctite, but it is actually anti-seize, and not thread...
-
RGrease is grease just take some out of your grease gun. I do not use any color of loctite for guns other then purple, and never on a...
-
RRugerHawg413 replied to the thread Please Help!-Muzzle Break Install.Understood, thank you!!
-
RRugerHawg413 reacted to redneckbmxer24's post in the thread Please Help!-Muzzle Break Install with Like.
I edited my post about loctite. Pretty much any grease will work or even oil. Gun grease, bearing grease, marine grease. If you use anti...
-
RRugerHawg413 replied to the thread Please Help!-Muzzle Break Install.What kind of grease do you recommend? And should I put any blue Loctite on it? Thank you!
-
RRugerHawg413 reacted to redneckbmxer24's post in the thread Please Help!-Muzzle Break Install with Like.
Unscrew the thread protector, make sure the rear shoulder of the brake and shoulder of the muzzle are clean and free of debris, put a...
-
RRugerHawg413 posted the thread Please Help!-Muzzle Break Install in Rifles, Bullets, Barrels & Ballistics.Hello, I have a Ruger M77 Hawkeye FTW, the older version. Anyway, I was wanting to install a muzzle brake on it (the factory muzzle...
-
-
RRugerHawg413 replied to the thread 6.5 CM, 6.5 PRC Enough/Effective for Elk?.Understood. And after reviewing the replies to my post, I agree. Thank you for your info and knowledge!
-
RRugerHawg413 reacted to WYO300RUM's post in the thread 6.5 CM, 6.5 PRC Enough/Effective for Elk? with Like.
True. And how are you going to predict the range? You might be tempted to take a longer shot than you are comfortable with when a big...
-
RRugerHawg413 reacted to MOA or bust's post in the thread 6.5 CM, 6.5 PRC Enough/Effective for Elk? with Like.
Hardshot, If you want an exit wound and not satisfied with present bullets, then try a monolithic bullet (Ex. Barnes, Hammer, etc). I...
