Recent content by Punisher

  1. Punisher

    156 EOL at 3100 FPS

    Is it Weatherby brass? I’ve found that Weatherby brass typically holds 3% or more water than other cases by different manufacturers... and that’s why I love Weatherby brass!
  2. Punisher

    Pig saddle/ reaper grip or similar

    Looking for a pig saddle/ reaper grip or similar. let me know what you have.
  3. Punisher

    Hog saddle..... ?

    yeah, but people still search the threads. Like I found it because I’m looking for one to buy for my son.
  4. Punisher

    Hog saddle..... ?

    The reason we rest holds the rifle better. but the pig saddle is made of steel, the hog saddle out of aluminum. I would say strength is similar in both, but the stamped metal of the pig saddle may bend of you torque it heavily. I’ve seen the hog saddle sell for around $350. There’s no way I’d...
  5. Punisher

    Manners T2 Winchester M70 with CDI bottom metal $585

    This stock is inlet for a Model 70 Featherweight (same as the FN) two left side flush cups and a badger rail. it’s the new model 70 with single piece floorplate. 7 3/8” spacing. This model has one length for long and short action. this will come with the CDI bottoms metal that receives AI...
  6. Punisher

    156 EOL at 3100 FPS

    Berger just updated their calculator for this in the past few months. At slow velocities, they said that that it would be marginally stable, but over 3000 fps of muzzle velocity, I don’t think you will notice “marginal” conditions. This lead them to update the suggested twist for most of their...
  7. Punisher

    156 EOL at 3100 FPS

    berger updated their twist calculator. 1:8” is sufficient for the 156.
  8. Punisher

    156 EOL at 3100 FPS

    it’s a belted magnum case.You can use just about any case with a belt. it’s xactly .308 length. i typicallyseat long, but I can still stack in an AICS mag. right now, I have some cases I made from a .300 Wby mag and it’s shooting almost a single hole at 100 with under 10 ES. this thing has...
  9. Punisher

    156 EOL at 3100 FPS

    Well, I know one guy who claims to get that velocity with the 6.5 PRC. everyone else I know is in the high 2900’s. I’m pushing the 195 EOL at 2965 with my 7mM Rem Mag. and I have a Wildcat that I call the 6.5 Colorado that pushes the 156 at 3150fps. I actually pushed a Barnes 127 LRX to...
  10. Punisher

    Manners T2 for Winchester Model 70.

    the FN made model 70 is only one action length. So pre-64 and post 2008 are the same. it has a short action bottom metal though. screw spacing is 7 3/8”
  11. Punisher

    Manners T2 for Winchester Model 70.

    You can buy the other bottom metal and go to long action.
  12. Punisher

    Manners T2 for Winchester Model 70.

    Yes, but it takes a short action magazine with this bottom metal.
  13. Punisher

    6.5 SAUM+Berger 156

    and just think, that’s what the PRC crowd boasts too. I push them at 3150 in my 6.5 Colorado wildcat. 56.7 grains of Retumbo.

Trending threads

Top